Download the .svg file For laser cutting. To cut various thicknesses of proof-grade acrylic, we used a Glowforge laser cutter with automatic power and speed settings. (The bottom and middle layers are made from thick 3/16″ acrylic. The clear top and small discs are cut from thin 1/8″ acrylic. The Glowforge also features engraved emoji face designs. automatically sets the depth.
Of course, with a little trial and error, any laser cutter will work. The design is simple enough to scale up and can be handmade, but laser cutting allows you to quickly create perfect miniature parts.
Finish the engraved emoji disc with black acrylic paint. Fill in the engraving and then wipe the surface to get a clean graphic.
To assemble, glue the middle layer to the back with acrylic solvent cement. Add a loose disc and glue a clear cover over it. Be careful not to get solvent on the disc. The disc should slide freely inside.
Print the label on peel-and-stick label paper, trim the identification hole, and cut it out. Align the holes with the slots and attach the label to the transparent cover.
It’s the perfect size for your pocket. Attach it to your keychain or necklace. Or you can add ribbon and hang it as a holiday tree decoration.